Mmschoe's List: Computer Hardware - Printer, Hard Drive, MotherBoard, CPU

" Specification
MFC-210C
General
Print Engine Inkjet
Scanning Method CIS
Dimensions (W x D x H) *1 14.7 x 13.6 x 5.3 inches (373 x 345 x 135 mm)
Weight 12.1 lbs (5.5 kg)
Document Input Width(Scanner Glass) 8.5 inch (216 mm)
Document Input Height(Scanner Glass) 11.7 inch (297 mm)
Paper Tray Capacity 100 pages
Output tray Paper Capacity 25 pages
PC Interface USB 2.0 Full Speed"

"How do I replace the Ink Cartridge?

Description:

Replace the Ink Cartridge by following the instructions below:

Open the Scanner Cover by lifting from the right-hand side of the MFC until it locks securely into the open position.

Pull the ink cartridge hook toward you and remove the ink cartridge for the color shown on the LCD.

Open the new ink cartridge bag for the color shown on the LCD and take out the ink cartridge.
Remove the cartridge cover. Carefully remove the cover in the direction away from you.
Note
To prevent spilling ink and staining your hands and clothing, remove the cover gently.
If the cartridge cover comes off when you open the bag the cartridge will not be damaged.

CautionDo not touch the area shown in the illustration above.

Each color has its own correct position. Keep the ink cartridge in an upright position when you insert it into the slot. Press down firmly on the ink cartridge until the hook snaps securely over it. Push the plastic hook towards the cartridge to verify it is latched over the top edge of the cartridge.

HintTo maintain the best print quality, follow these instructions when you instert the ink cartridges:
Keep the ink cartridge in an upright position when you insert it into the slot.
Press down on the ink cartridge firmly until the hook snaps securely over it as shown in the illustration.

 
 


After installing the ink cartridge, lift the scanner cover to release the lock.
Gently push the scanner cover support down and close the scanner cover.

The LCD may then display:
Did you change (Color)? 1.Yes 2.No.
BE SURE to select 1 Yes. If 1 YES is not selected for the replaced cartridges, INK EMPTY will appear again.
The MFC will enter a cleaning cycle for approximately 3 minutes for each replaced cartridge. The LCD alternately shows CLEANING and PLEASE WAIT. When the MFC completes the cleaning cycle, the LCD returns to Standby mode (date and time)."

"How to Download and Install
Notes:

The instructions may vary depending on the Windows Vista® version.
If the drivers are already installed into your computer, uninstall them first before you install the new driver. To uninstall the current drivers, download the Uninstall Tool. To see how to download and use the Uninstall Tool, click here.
Unplug the FAX/DCP/MFC from the AC outlet and disconnect your FAX/DCP/MFC from your computer if you already connected an interface cable.
You must be logged on as an Administrator.
If the "User Account Control" prompt is displayed, click "Continue".
If the "Windows Security" alert prompt is displayed, click "Install this driver software anyway.".
Make a temporary folder or directory on your HDD [hard disk drive] as the location to save the downloaded self-extracting file, e.g. C:\brodnt
Download the file to the temporary folder or directory..
Once the download is complete, open the folder or directory and double click on the downloaded file to extract it.
You will find two folders: "Setupxxxx" (where xxxx = model name) and "Data" in the folder created in Step 3.
Open the "Setupxxxx\yyy" directory (xxxx = model name yyy = language name) and double click "Setup.exe".
The installation will start. Please follow the installation screen directions.




Print  |  Close
© 2001-2013 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
"

"
Connect your classic printers with Google Cloud Print


If your printer is Cloud Ready, follow your manufacturer's provided instructions or see setting up your Cloud Ready printer.
To connect your classic printer, enable the Google Cloud Print connector on any (non-Chrome OS) computer that is already connected to your printer and able to print. You'll need Google Chrome to be installed on the computer. If you're using Windows XP, make sure you also have the Windows XP Service Pack 3 (SP3) installed.

Once Google Chrome is installed, follow the steps below to enable the Google Cloud Print connector in Google Chrome.

Log in to your user account on the Windows, Mac, or Linux computer.
Open Google Chrome.
Click the Chrome menu on the browser toolbar.
Select Settings.
Click the Show advanced settings link.
Scroll down to the “Google Cloud Print” section. Click Sign in to Google Cloud Print.
In the window that appears, sign in with your Google Account to enable the Google Cloud Print connector.
Select the printers you want to connect, and then click Add printer(s).
You'll see a confirmation that Google Cloud Print has been enabled. Click Manage your printers to learn more.
The printer is now associated with your Google Account and connected to Google Cloud Print. You can print to this printer using Google Cloud Print whenever you’re signed in with the same Google Account.

Jan 29, 2013
"