Home
Mark -'s Library tagged → View Popular
What other AM2 boards will boot 335+HTT @ 3x? - XtremeSystems Forums
"What other AM2 boards will boot 335+HTT @ 3x and have 2.3+ vdimm in the bios? Reason I'm asking is because my current NF-M2 will boot 335HTT reliably and 340HTT rebooting but on cold starting, I have to press the reset buttong to get it to reboot. Now the problem I have is that I can only run those speeds at 2x HTT, at 3x, 275HTT is the max stable and adding voltage to the chipset does nothing. Also it looks like 340HTT is the max bootable because no matter what I do, lower CPU multiplier, 1x HTT, add voltage, change mem divider, etc, it will not boot higher than that. I can go higher using ClockGen but I want a mobo that can at least do the same speeds I have but at 3x HTT.
Here what the NF-M2 is currently Priming at(it already Primed over 3hrs on this setting but I had to reboot, so I just restarted it)
"
Athlon64 Overclocking Optimizer - XtremeSystems Forums
-
Instructions:
1) Finding Maximum Values
First of all you should find out how far each component can overclock individually. You'll need to know your maximum HTT/FSB, CPU, RAM and optionally also the Hypertransport bus. People who don't know how to do this should have a read at this thread:
http://forums.anandtech.com/messagev...VIEWTMP=Linear
2) Fill Them In
Once you know all the maximum speeds that your hardware can do you simply fill them in in the form called "Known Maximum Values" on the page and hit " GO! ".
A table with HTT, multiplier and divider combinations should appear. The table is sorted according to how close the values are to your maximums, the best options should at the top.
3) Importance Weighting
The table Importance Weighting is where you can de define how important it is to you that the specific component runs close to it's maximum. It will make the trade-offs based on those settings.
Generally the importance weighting is fine on the default setting.
cpu 100 (cpu is king)
ram 10 (also take the memory into consideration)
ht 0 (not important)
htt 0 (not important)
When a weight is set to 0 it will still favour the highest possible multi or divider, so for example it won't suggest to run your HT bus at 2x while it could run at 3x.
In most situations you shouldn't have to change the weights.
4) Important Notes
To get a large number of results to choose from, it is important that you enter a high HTT value. Please do actually test what it's maximum is, instead of just entering the HTT that you're currently using.
Some memory dividers aren't available on all motherboards, if a memory divider is suggested in the table that isn't available on your board, you will have to look further down in the table for combinations that do work with your motherboard.
Another option could be to look for a hacked bios.
Use of my script or it's results is completely at your own risk.
How to setup? - Joomla! Core Design
Manually:
{magictabs}
TAB 01::Lorem ipsum dolor sit amet consectetuer nec eu magna consequat volutpat. Ut porttitor purus hendrerit nibh id sit id ultrices eu netus. Et eros cursus Sed sit adipiscing Vivamus ut magna Nulla nibh.
||||
TAB 02::Lorem ipsum dolor sit amet consectetuer nec eu magna consequat volutpat. Ut porttitor purus hendrerit nibh id sit id ultrices eu netus. Et eros cursus Sed sit adipiscing Vivamus ut magna Nulla nibh.
||||
TAB 03::Lorem ipsum dolor sit amet consectetuer nec eu magna consequat volutpat. Ut porttitor purus hendrerit nibh id sit id ultrices eu netus. Et eros cursus Sed sit adipiscing Vivamus ut magna Nulla nibh.
{/magictabs}
-
Manually:
{magictabs}
TAB 01::Lorem ipsum dolor sit amet consectetuer nec eu magna consequat volutpat. Ut porttitor purus hendrerit nibh id sit id ultrices eu netus. Et eros cursus Sed sit adipiscing Vivamus ut magna Nulla nibh.
||||
TAB 02::Lorem ipsum dolor sit amet consectetuer nec eu magna consequat volutpat. Ut porttitor purus hendrerit nibh id sit id ultrices eu netus. Et eros cursus Sed sit adipiscing Vivamus ut magna Nulla nibh.
||||
TAB 03::Lorem ipsum dolor sit amet consectetuer nec eu magna consequat volutpat. Ut porttitor purus hendrerit nibh id sit id ultrices eu netus. Et eros cursus Sed sit adipiscing Vivamus ut magna Nulla nibh.
{/magictabs}
Santa Fe Beeswax Candle Co. wick info
"A 36 ply wick can draw a little bit more wax than a 30 ply wick can, which gives the 36 ply wick a larger flame. The purpose for the flatness of this wick is because it curls over to the side when it burns. This curling of the wick helps prevent excess smoking.
The Square Braid wick is referred to by a numbering system. It ranges from 6/0 (pronounced "six aught") to 1/0 from small to large, comprised of eight bundles of a quantity of ply per bundle and two bundles with a lesser quantity of ply per bundle. Example: (1/0) - 8 bundles of 4 ply with 2 bundles of 3 ply = 38 ply.
The numbering moves on to another system from #1 to #10 from small to large. This range is more robust than the #/0 system and is comprised of four bundles of a quantity of ply, four bundles of a lesser quantity, and two bundles of the lesser quantity twisted together. Example: (#4) - 4 bundles of 8 ply, 4 bundles of 7 ply, with 2 bundles of 7 ply twisted together = 74 ply.
When burning a candle with a Square Braid wick, a carbon cap forms on the top of the wick. This property is especially useful in tall glass container candles. The carbon cap radiates heat outward, which helps melt wax which is further away from the flame, reducing the amount of wax hanging on the sides of the container. "
Selected Tags
Related Tags
Sponsored Links
Top Contributors
Groups interested in faq
-
Informative
Items: 11 | Visits: 37
Created by: eartho
-
All things Flex FAQ
This list is to organize al...
Items: 19 | Visits: 49
Created by: Mairon Croes
Diigo is about better ways to research, share and collaborate on information. Learn more »
Join Diigo