545 items | 159 visits
steve t's List: trainz
-
Feb 22, 10
"Is it possible to drive a consist to an industry and unload only 1 car. I would like to drive a consist to Goods shed no 1 and unload car no 1, drive to goods shed no 2 and unload car no 2, etc. This seems like a simple thing to do but I can't figure out how to set it up. Any help is appreciated.
" -
Feb 22, 10
"After running the PM2IM routine to create an .im file, then deleting the .pm file, I still always get the error about progressive meshes. It's like in some file other than the config.txt there is some reference to the old .pm file. This occurs every time I try replacing .pm with .im files, no matter what asset. Is there some step I'm missing, besides creating the .im file?
" -
Feb 22, 10
"Here is one way. Open CM and click on installed. Then right click on the asset. If “view dependant assets” is grayed out delete it.H
__________________
2009 all the way " -
-
-
Bingo!
I made a rake of four of them, drove them up to the ProtoLARS, waited the one minute delay and then one by one the cars unloaded. After the last car was unloaded the first car loaded with the tank containers and so on until they were all loaded. It's brilliant. I haven't tried it with other products (yet) but I have no reason to think that they won't work.
-
-
-
Dec 03, 09
"And finally offered a. txt with the list of objects from third parties (not incorporated into TRS2006) used in the route"
-
-
-
It's KUID2: 209453:99991:1 on the DLS
I'm aware that someone created an 'invisible wagon' to trigger level (grade) crossings. If it's freely available that might be an alternative. 
-
-
-
i have one that works exactly like the junction controller. you drop the cube down in surveyor and tell it what signals to link together. one as a parent and the other as a child. there are two ways of doing this. one way the child signal will display exactly what the parent signal does, and the other way is that it only clones the danger state, under any other aspect they are automatic (normal). it was a small side project that never really got developed fully but it would be worth a try.
get it here (http://www.jointedrail.com/content/Freeware/Trackside/SignalLink.cdp) and let me know how it goes.
i also have a token block controller that is very similar but is more complex to set up, you can have multiple triggers and signals.
Mordachai
-
-
-
This release features the western end of the Clovis Sub.
-
-
-
DAP wrote:
Your suggestion worked. First, I removed the assets from the route. Then I copied my library and portal assets to a cdp. Then deleted the original copies listed in CM2. I then loaded the the route (the library asset was still there and doing it's init routine). Then save it. Upon loading it again, the persistance was broken and the library functions were no longer happening.
-
-
-
SCS2006 Support
Moderators: Peter, kcooper, IamKJVonly, thackalane
Users browsing this forum: None
-
-
-
There is also a limit to the number of threads that can be run in a scenario which I believe is 64. I have found ways to increase the number of trains that can be run within this limitation and can explain them to you if you ever reach the limit.
-
-
Nov 21, 09
-
The sessions of the Crewe route run to careful timetable and I have documented the method in various threads. This is the only method I have found that works reliably.
I am just putting the finishing touches to a Crewe session '100 Trains' during which more than 100 trains pass through Crewe on a strict timetable over 3 hours including engine changes, shunting, breaking down and making up trains etc. the existing '50 Trains' session already uploaded utilizes all the control techniques I have configured to achieve timetable working - and it works GREAT!
-
-
-
Programming the Portals
-
-
-
Try the Portal Timetable Rule found on the DLS.
http://www.openspeedway.net/files/pics/ptr.jpg
You can set which portal you want it to come out of with "Emitting Portal
You can set what time it comes out with "Add New Timetable"
You can set what train comes out with "Add an existing saved consist"
You can select a driver with "Add Driver to Consist"
You can use the command bar to add and save commands for the AI to follow.
To add another train just click on the "I" box at the bottom.
-
List Comments
(0)
List Info